Kabel Adaptor LED Lampu Depan dan Belakang Kustom — Rangkaian Terminal Jantan/Betina

Product Overview

Deskripsi

Kabel Adaptor LED Lampu Depan dan Belakang Kustom adalah rangkaian konduktif yang dibangun khusus untuk dicolokkan ke soket lampu depan, lampu belakang, atau modul LED kendaraan yang ada dan menampilkan konektor yang berbeda — jantan atau betina — di ujung yang lain. Ini memecahkan masalah paling umum dalam penerangan retrofit dan aftermarket: lampu donor dan modul LED baru menggunakan keluarga konektor yang tidak kompatibel. Alih-alih mengganti seluruh loom, masukkan kabel adaptor yang dibangun sesuai pin-out tepat Anda.

Setiap adaptor dibangun satu-ke-satu sesuai gambar atau sampel Anda. Jumlah inti, jumlah pin, jenis terminal (jantan atau betina), dan panjang kabel semua dikustomisasi. Panjang standar adalah 250 mm, tetapi kami secara rutin membangun pigtail 100 mm dan ekstensi NEV 3-meter pada keluarga produk yang sama. Kami membawa stok dalam tembaga murni 0,35 / 0,5 / 0,75 / 1,0 / 1,5 / 2,0 mm² dengan isolasi tahan api PVC V0 di seluruh rentang suhu otomotif -40 °C hingga +140 °C.

Empat varian struktural dikirim dari lini produk ini: (A) adaptor multi-cabang dengan AMP, Sumitomo, dan terminal soket bohlam untuk rakitan lampu depan lengkap, (B) konektor utama pin tinggi dengan pembagi 4-arah JST / PH untuk driver LED matriks, (C) pigtail jantan-ke-betina langsung sederhana, dan (D) ekstensi bercabang dengan perlindungan konduit bergelombang. Terminal tembaga cetak dingin pada setiap kontak, 100% diuji tarik pada beban nominal, dengan kontinuitas dan hi-pot diuji sebelum pengemasan. MOQ sampel 10 buah, MOQ produksi 500+ buah, penawaran kustom dalam 24 jam.

Key Features

Mengapa Rangkaian Kabel Ini

01

Terminal Jantan dan Betina

Cross-matched pins and receptacles per drawing — adapter plugs into your existing fixture without splicing or rewiring.

02

Terminal Tembaga Cetak Dingin

Fully automatic cold-press crimping on high-conductivity copper — 100% pull-tested and 1500 VAC withstand checked.

03

Siap Frekuensi Tinggi

Rated for LED driver PWM and CAN-bus signals — carries adaptive matrix headlight commands without distortion.

04

Tahan Api PVC V0

UL 94 V0 automotive-grade PVC insulation, RoHS & REACH compliant — safe for both interior and engine-bay routing.

05

Sepenuhnya Dikustomisasi

Core count, pin count, terminal polarity, and length — all built one-to-one to your drawing or sample.

06

MOQ Hanya 10 buah

Prototype-friendly minimum order — perfect for retrofit shops, fleet pilots, and small-batch upgrade kits.

Technical Data

Spesifikasi

Product Code	AUTO-15 · WHW-HEADLIGHT-LED-ADP
Type	Wiring harness / Connection cable / Terminal wire
Application Field	Automotive headlights, taillights, LED adapter modules, NEV lighting
Working Frequency	High frequency (LED PWM, CAN-bus compatible)
Shape	Strip
Standard Length	250 mm (custom 100 mm – 3 m available)
Conductor	Cold-press stranded copper
Insulation Material	PVC, automotive grade
Flame Retardant	V0 — fire & flame retardant (UL 94)
Cores	Customized to drawing
Pins	Customized to drawing
Terminal Polarity	Male / Female / Mixed pair (M↔F adapter)
Connector Brands	AMP / JST / Sumitomo / KET / Molex / Yazaki / Delphi
Terminal Types	Cold-press crimp · TAB (Faston) · Bullet · Ring · Pre-insulated
Manufacturing Process	Cold press · Fully automatic · Customized
Withstand Voltage	1500 VAC / 1 min
Operating Temp	−40°C to +105°C
Variant A	Multi-branch adapter — AMP + Sumitomo + bulb socket
Variant B	High-pin main connector + 4-way JST / PH split
Variant C	Heat-resistant white braided sleeve + TAB / PH terminals
Variant D	High-pin yellow-lock main adapter + multi-port outputs
Field of Use	New Energy (NEV) · automotive aftermarket · OEM retrofit
Certification	UL · RoHS · REACH
Quality System	IATF 16949 · ISO 9001
MOQ	10 pcs (prototype-friendly)
Sample Lead Time	7–10 days
Mass Production Lead Time	15–25 days after artwork approval

FAQ

Pertanyaan yang Sering Diajukan

Can you customize the core count, pin count, and wire length?

Yes — core count, pin count, and wire length are all fully customizable. Our standard length is 250 mm, but we routinely produce 100 mm to 3 meters per drawing. Send us a sample harness, photo, or BOM and our engineering team will quote a 1:1 match within 24 hours.

What is the difference between male and female terminal versions?

The male terminal version has pins that insert into the mating connector — typically used on the harness side that plugs into the headlight or LED module. The female terminal version has receptacles that accept the pins. Both ship from the same line; we cross-match per drawing so the assembly plugs straight into your existing fixture without modification.

Is this harness suitable for high-frequency LED drivers and CAN-bus circuits?

Yes. The harness is rated for high-frequency operation, which means it carries the PWM dimming signals of LED drivers and CAN-bus communication without distortion. Shielded variants are also available on request for noise-sensitive installations such as adaptive matrix headlights and intelligent taillights.

What is the MOQ and lead time?

MOQ is just 10 pcs — perfect for sample runs, prototyping, and small workshops. Sample lead time is 7–10 days from drawing approval; mass production is 15–25 days. We accept PayPal and bank transfer for sample orders and ship via DHL, FedEx, or UPS worldwide.

Which connector brands and terminal types do you support?

We support all major automotive connector brands — AMP (TE Connectivity), JST, Sumitomo, KET, Molex, Yazaki, and Delphi. Terminal types include cold-press crimp, TAB (Faston / quick-disconnect), bullet, ring, and pre-insulated. Mixed-brand connectors on a single harness are fine — that is in fact the main use case for adapter wires.

Applications

Di Mana Dipasang

01

Rangkaian kabel lampu depan otomotif

02

Kabel adaptor lampu belakang

03

Kit konversi modul LED

04

Rangkaian kabel retrofit aftermarket

05

Lampu depan matriks dan adaptif

06

Sistem penerangan NEV

07

Ekstensi terminal jantan / betina

08

Kabel Adaptor LED Lampu Depan dan Belakang Kustom — Rangkaian Konduktif Terminal Jantan / Betina

Deskripsi